Disability Transporter

• Customization: Available
• Certification: ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
• Model NO.: disability transporter

Product Description

Product Description

Chase V80 short axle disability transporter

1. Product catalogue

 

Serial number	Product name	Product model
1	Chase V80 short-axle disability transporter (diesel national six, MT)	CL5040XSC6AYS

2. Product introduction

The Chase V80 short-axis disability transport vehicle is modified by the Chase V80 short-axis model launched by SAIC-Datong. It adopts the new SAIC π diesel engine, latest high-pressure common rail system up to 2000 bar,  latest generation MD1 ECU controller, VGT variable cross-section turbocharger, continuous variable vortex intake valve, separated cooling, crankshaft bias and other eight technical applications, with a speed of up to 160km/h. /H; Using the ESP version 9.1 electronic stability auxiliary system, it can actively detect and analyze road conditions and reasonably adjust the driving direction; adopt an integrated, cage frame structure load-bearing body, European safety collision design standards, the key parts of the body are made of ultra-high-strength steel, the consumption is up to 50%, the same The products are only about 30%; the overall body center of gravity is low and more stable, which effectively ensures the safety of the driver;The medical cabin is spacious and reasonable in design; the whole car adopts the leading domestic modification technology and is equipped with a special wheelchair stretcher platform, which is mainly used to transport the disabled.

 

3. Vehicle parameters and standard configuration


Technical requirements


Modified base car (chassis car): Chase V80 short-axle diesel national six manual transmission


Appearance color: white/red


Announcement parameters
 

Maximum total quality	3800kg
Number of passengers	6-7 people (including the number of stretchers)
Wheelbase	3100 mm
Body size: length × width × height	4900mm×1998mm×2405mm
Back cabin size: length × width × height	2300mm×1700mm×1600mm
Approach/depanct corner	26º/14º
Maximum speed	150km/h
Engine model	SC20M125.1Q6
Engine displacement	1.996L
Emission standards	Country VI
Rated power	93KW
Fuel tank capacity	80L
Drive type	Front front drive
Minimum ground clearance	159mm
Transmission box	6 forward gear, 1 backward gear
Suspension type	Front McPherson independent suspension/rear non-independent suspension
Type of assistance	Gear rack type, hydraulic power steering
Brake type	Front and rear discs, hydraulic braking

 

Appearance structure
 

Body structure	The steel reinforced frame structure is designed, which is safe and reliable.
	The right side of the car body is equipped with a sliding door, and the back end adopts a double-open tailgate structure with a large opening width, which is convenient for doctors and patients and stretchers.
	Up and down.
	The whole body is white, with colored strips around it. The color is bright and eye-catching, which is an effective warning.
Appearance of the vehicle	Medical cabin glass sticker 2/3 frosted cellophane to effectively protect personnel's privacy

Ambulance facilities

Automatic wheelchair stretcher: the stretcher is made of high-strength aluminum alloy, PVC waterproof sponge mattress, adjustable backrest
_{Rescue system}  Section; the thickened oval leg tube, the evenly distributed auxiliary wheels and aluminum blocks greatly increase the bearing capacity of the derrig, and only one person is needed to easily complete the ride-on process.

Streter platform: Made of high-quality aluminum alloy material, assist the stretcher to get on and off the car.

Infusion rack: Install a set of aluminum alloy rail infusion rack on the top of the medical cabin, including 2 folding hooks.

Two 10L steel oxygen cylinders, nominal pressure 15MPA (light weight, easy to load and replace), equipped with two
_{Medical oxygen control system}  A single-table pressure reducing valve, two German oxygen terminals, a ventilator interface and a wall oxygen inhaler. When the patient inhales oxygen, the amount of oxygen can be controlled, and it is equipped with a humidification bottle to provide the patient with moist oxygen, which is more conducive to the patient's oxygen intake.

Electrical system

 

Lighting lights	4 12V cabin lights, stable light source, large irradiation surface, 2 infusion spotlights.
Inverter	On-board sine wave 1000W, stable frequency, stable voltage and stable output power, providing for on-board equipment
	Power supply; 2 sets of 220V/12V multi-function sockets (can be connected to two/three holes, AC/DC dual-purpose).

 

Disinfection lamp

Intelligent and timed ultraviolet disinfection to ensure the hygiene and safety of the cabin.

Air circulation system
 

Air conditioning/warm air	1 set of rear air conditioning and rear heating device, independent control of cooling and heating, reasonably regulate the temperature in the cabin according to needs.
Ventilation fan	Install a set of DC12V multi-functional ventilation fan with suction and exhaust on the roof, which can effectively ensure the efficient air in the medical cabin.
	Cycle.

 

Cabinet interior configuration

Cabinet/interior configuration
 

Middle wall assembly	Install a middle partition wall made of new environmentally friendly materials between the cab and the rear compartment, and set a glass on the middle wall.
	The observation window is convenient for front and rear cabin observation and communication.
	Install a set of long equipment cabinets made of new environmentally friendly materials, and the cabinet is equipped with drawers, space cabinets and other storage spaces.
	Between;
Cabinet assembly	Install a set of oxygen cylinder cabinets made of new environmentally friendly materials, which can accommodate 2 10L oxygen cylinders;
	Install a wall cabinet made of new environmentally friendly materials. The wall cabinet adopts an upper door structure, which is convenient to open the cabinet door;
	Install 2 sets of independent seats and three-point seat belts.
Interior decoration	Interior: Made of new lightweight materials, waterproof, mildew-proof, antibacterial and easy to clean.
	Floor: Made of medical floor leather material, non-slip, waterproof, anti-mildew, antibacterial and easy to clean.
Auxiliary equipment
Side sliding door and sliding window	Flat sliding glass window.
Intercom	Install a hands-free microphone in the cockpit and the rear cabin to facilitate communication between the front and rear cabin personnel.
Fire extinguisher	It is equipped with a set of 1kg dry powder fire extinguisher.
Sludge bucket	It is equipped with a foot-type sewage bucket with a lid.
Safety armrest	Install a long armrest on the top.
Emergency hammer	Install 1 emergency hammer.
Optional configuration
Driving assistance system	Including large-screen navigation, driving recorder, and reversing images.
Shovel stretcher	1 pair, (optional stretcher warehouse)
Stair stretcher	1 pair, load-bearing: 160kg
Middle door pedal	Assist the middle door to get on the car
Tailgate pedal	Assist the tailgate to get on the car

 

 

4. Reference pictures(This picture is for reference only, subject to the customer's actual order)

 

5

 

5. Configuration list
 

Serial number	Configuration name		Model/Picture Number	Main functions/technical parameters	Unit	Quantity	Remarks
One	Rescue system
(I)	Strenders and equipment
1	Automatic wheelchair stretcher			Load-bearing: 181KG	Assistant	1
2	Slide-rail infusion gripper			Load-bearing: 2.5KG	Case	1
(II)	Oxygen supply facilities
1	Oxygen cylinder		10L	Steel, nominal pressure	Self	2
				15MPA
				The oxygen interface is a two-stage roller.
2	Oxygen inhaler			Lock structure, effective protection	Single	1
				Oxygen, scaled humidification bottle
3	Ventilator interface			Quick plug-in	Single	1
4	Pressure regulating valve			Single table	Single	2
Two	Outward appearance
(I)	Color bars and signs
1	Body sign		Reflective film	Bright color, eye-catching, effective warning	Case	1
				Show
2	Body color strip		Reflective film	Bright color, eye-catching, effective warning	Case	1
				Show
3	Frosted film		2/3 size	Right and back doors	Case	1
Three	Electrical system
(I)	Power supply configuration
1	Inverter			1000W	Case	1
2	AC/DC socket		Combination socket	AC/DC dual-use socket	Organize	2
(II)	Lighting in the car
1	Indoor lighting		DC12V	Large electronic display	Small cup	4
2	Infusion spotlight		DC12V	Large electronic display	Small cup	2
(III)	Auxiliary facilities
1	Back air conditioning		Hao Yin	After installing the air conditioner	Case	1
2	After warm wind		Hao Yin	Warm air after installation	Case	1
3	Intercom		DS-236	Hands-free intercom	Case	1

 

6

 

 

	4	Ventilation fan		Dual functions of ventilation and inhalation	Case	1
	(IV)	Disinfection facilities
	1	Ultraviolet disinfection lamp	HTD-8W	Time-timing function	Small cup	1
	Four	Cabinet/interior system
	(I)	Cabinet system
	1	Septum assembly		Light and environmentally friendly materials	Case	1	Han Guan
							Check the window
	2	Left equipment cabinet		Light and environmentally friendly materials	Case	1
	3	Left oxygen cabinet		Light and environmentally friendly materials	Case	1
	4	Left wall cabinet		Light and environmentally friendly materials	Case	1
	(II)	Interior system
	1	Roof interior	Light and environmentally friendly materials	Waterproof, anti-corrosion, wear-resistant, resistant	Case	1
				Bacteria, easy to clean
	2	Medical floor	Medical floor leather	Anti-slip, waterproof, anti-corrosion, resistant	Case	1
				Grinding, antibacterial and easy to clean
	Five	Other
	1	Single seat		Blue imitation leather	Case	2
	2	Fire extinguisher	Dry powder type	1kg	Self	2
	3	Armrest	Yellow	Roof safety armrest	Item	1
	4	Safety hammer		Escape emergency facilities	Self	1
	5	Sludge bucket		Foot pedal	Self	1
6. Optional configuration list
	1	Driving assistance system		Large-screen navigation, driving recorder, reverse	Case	1
				Car image
	2	Shovel stretcher		Selection of stretcher warehouse	Assistant	1
	3	Stair stretcher		Weight: 160kg	Assistant	1
	4	Side door pedal		Assist the middle door to get on and off the bus	Case	1
	5	Tailgate pedal		Assist the tailgate to get on and off the bus	Case	1

 

Detailed Photos

 

Company Profile

FAQ

Q: Which brand of vehicles we can buy from your company? 
A:We maintain a good cooperative relationship with domestic car companies. Please let us know which brand you are interested in, and we will provide you with a satisfactory price.

Q: What is your payment terms? 
A: We accept T/T, Alipay, and other flexible payment terms.

Q: What's your delivery time? 
A: If cars are in stock, the delivery time is within 10-15 working days after receiving the deposit. If not, it is within 20-25 working days after receiving the deposit. 

Q:What is your shipping method? 
A: Transport by sea, by trailer, rail via containers, LCL and RO-RO vessel according to your requirements. Meantime, we also provide the most economical method for you.